https://www.youtube.com/watch?v=KBvyX80Pdec

Video 1073

Video 1074

https://www.youtube.com/watch?v=edO3qb0RtiU

Video 1075

https://www.youtube.com/watch?v=_AUDlE6aAtI

§ AS/NZS 3000 requirements limiting voltage drop in an installation

Video 1076.

https://www.youtube.com/watch?v=hPHLxi9qBH8

Video 1077

https://www.youtube.com/watch?v=f1NNHgxHiBw

Video 1078

https://www.youtube.com/watch?v=VOR0R9BXoHc

Video 1079

https://www.youtube.com/watch?v=ggKnH-95ty0

Video 1080

https://www.youtube.com/watch?v=TcAyFuPKssw

Video 1081

https://www.youtube.com/watch?v=h1FzMvnJmZ4

Video 1082

https://www.youtube.com/watch?v=8fn0Rg_YC7w

Video 1083

Video 1084

https://www.youtube.com/watch?v=Wq0uODypaGI

Video 1085

http://ipdgroup.com.au/ipdwc/VoltageDrop.aspx

§ reason for dividing electrical installations into circuits and the factors that shall determine their number and type.

Video 1086

https://www.youtube.com/watch?v=W0_1xRqT8uU

Video 1087

https://www.youtube.com/watch?v=d1jh2ig_5xU

Video 1088

https://www.youtube.com/watch?v=pe82jZgmW_0

Video 1089

https://www.youtube.com/watch?v=n-BpmdWNyZM

Video 1090

https://www.youtube.com/watch?v=JmwL-3rhgwY

Video 1091

https://www.youtube.com/watch?v=9uMIQycxygQ

Video 1092

https://www.youtube.com/watch?v=OUgPCiDoNDo’

§ typical external factors that may damage an electrical installation and that shall be considered in the installation design.

Video 1093

https://www.youtube.com/watch?v=t7DdDEYz4a4

Video 1094

https://www.youtube.com/watch?v=CGvOheMLsrA

Video 1095

https://www.youtube.com/watch?v=Y0S5Ckba9n4

Video 1096

https://www.youtube.com/watch?v=rpQwhiS-ooY

Video 1097

https://www.youtube.com/watch?v=NfRuLlTp5s8

Video 1098

https://www.youtube.com/watch?v=fvkc79jTHRA

Video 1099

https://www.youtube.com/watch?v=fJbJbKyX8Xs

Video 1100

https://www.youtube.com/watch?v=L2j5Qr0w4io

Video 1101

https://www.youtube.com/watch?v=sCXRDpKV_JQ

Video 1102

https://www.youtube.com/watch?v=DLWnN7xaXn8

§ methods for protecting persons and livestock against direct and indirect contact with conductive parts and the typical application of each.

Video 1103

https://www.youtube.com/watch?v=gUiEOltnGyI

Video 1104

https://www.youtube.com/watch?v=KlKiWk4Bb5Y

Video 1105

https://www.youtube.com/watch?v=fMt4yasO4WE

Video 1106

https://www.youtube.com/watch?v=BUmvA9SHXjw

Video 1107

https://www.youtube.com/watch?v=fxW1DT5Pk7Y

Video 1108

https://www.youtube.com/watch?v=ZfaQENB9oWg

Video 1109

https://www.youtube.com/watch?v=aS7zqgSXYIk

Video 1110

https://www.youtube.com/watch?v=ZY-WdRC_orU

Video 1111

https://www.youtube.com/watch?v=zXHTtJjsVQY

Video 1112

https://www.youtube.com/watch?v=ALvKGUwvSbc

§ acceptable methods of protection against the risks of ignition of flammable materials and injury by burns from the thermal effects of current, in normal service.

Video 113

https://www.atlantictraining.com/shop/training-video-how-to-handle-flammable-materials-safely

Video 1114

https://www.youtube.com/watch?v=CaDK26g9PxA

Video 1115

https://www.atlantictraining.com/shop/training-video-what-are-the-flammable-materials-in-the-workplace

Video 1116

https://www.youtube.com/watch?v=K-T3yCYRa1s

Video 1117

https://www.youtube.com/watch?v=1BY_S9Kctdw

§ likely sources of unwanted voltages and the methods for dealing with this potential hazard.

Video 1118

https://www.youtube.com/watch?v=wal2KP1bbIY

Video 1119

https://www.youtube.com/watch?v=igK-DRB5faU

Video 1120

https://www.youtube.com/watch?v=SYIqVLw79kc

Video 1121

https://www.youtube.com/watch?v=Pr9YntO7V1U

Video 1122

https://www.youtube.com/watch?v=AOgkxPmSYJk

§ acceptable methods for protecting persons and livestock against injury and property against damage from the effects of over current.

Video 1123

https://www.youtube.com/watch?v=wl16y_DhTTg

Video 1124

https://www.youtube.com/watch?v=303_8rvMgAg

Video 1125

https://www.youtube.com/watch?v=nkPB_8qrEXw

§ requirement for protection against fault current.

Video 1126

https://www.youtube.com/watch?v=yUbehZunDlc

Video 1127

https://www.youtube.com/watch?v=seyuW_fNbNc

Video 1128

https://www.youtube.com/watch?v=jBULGNO4SnU

Video 1129

https://www.youtube.com/watch?v=fR0EGCfC3rg

Video 1130

https://www.youtube.com/watch?v=phH0fFVK-AU

Video 1131

https://www.youtube.com/watch?v=G9W11B8sS1E

Video 1132

https://www.youtube.com/watch?v=2HFBSQ-BGRI

§ requirement for protection against the harmful effects of faults between live parts of circuits supplied at different voltages.

Video 1133

https://www.youtube.com/watch?v=zLW_7TPf310

Video 1134

https://www.youtube.com/watch?v=Vl3tvO51RTI

§ need for protection against injury from mechanical movement and how this may be achieved.

Video 1135

https://www.youtube.com/watch?v=JlBhqpsBtw8

Video 1136

https://www.youtube.com/watch?v=GwlW-ZnvDt0

Video 1137

https://www.youtube.com/watch?v=fKgM82ydSxA

§ features of 'fire rated construction' and how the integrity of the fire rating can be maintained in relation to electrical installation.

Video 1138

https://www.youtube.com/watch?v=JjnUThQIdbY

Video 1139

https://www.youtube.com/watch?v=MRVTX4ZvcC8

Video 1140

https://www.youtube.com/watch?v=R5G3_80CiC0

Video 1141

https://www.youtube.com/watch?v=vW5H8ab-OfA

Video 1142

https://www.youtube.com/watch?v=t25s8VDJCng

Video 1143

https://www.youtube.com/watch?v=UuTowptYlrM

T2 Final subcircuit arrangements encompassing:

§ factors that shall be considered in determining the number and type of circuits required for an installation.

§ daily and seasonal demand for lighting, power, heating and other loads in a given installation.

§ number and types of circuits required or a particular installation.

§ current requirements for given final subcircuits.

§ layout/schedule of circuits for given installations.

Video 1144

https://www.youtube.com/watch?v=nD7g-dyYn3w

Video 1145

https://www.youtube.com/watch?v=KrkPiAHy6pc

Video 1146

https://www.youtube.com/watch?v=AZenZfLQQgw

Video 1147

https://www.youtube.com/watch?v=TQOt_1awk9s

Video 1148

https://www.youtube.com/watch?v=_twVvsGo81A

T3 Factors affecting the suitability of wiring systems encompassing:

§ wiring systems typically used with various construction methods and particular environments.

Video 1149

https://www.youtube.com/watch?v=A5P-buWX-dA

Video 1150

https://www.youtube.com/watch?v=-AlsjIbu7Sc

Video 1152

https://www.youtube.com/watch?v=hKtedrJKyQs

Video 1153

https://www.youtube.com/watch?v=n-BpmdWNyZM

Video 1154

https://www.youtube.com/watch?v=Z2EZAgcdwaU

Video 1155

https://www.youtube.com/watch?v=5KezCTg0JMk

Video 1156

https://www.youtube.com/watch?v=A5P-buWX-dA

§ installation conditions that may affect the current-carrying capacity of cables.

Video 1157

https://www.youtube.com/watch?v=trjobAF5Q9Y

Video 1158

https://www.youtube.com/watch?v=9ZpbhPXujt4

Video 1159

https://www.youtube.com/watch?v=AOctHaAxEoM

Video 1160

https://www.youtube.com/watch?v=2Awciz5iHE0

§ external influences that may affect the current-carrying capacity and/or may cause damage to the wiring system

Video 1161

. https://www.youtube.com/watch?v=KBvyX80Pdec

Video 1162

https://www.youtube.com/watch?v=MB5Q-dA-xKk

Video 1163

https://www.youtube.com/watch?v=jQ2nD8ZGeEw

§ AS/NZS 3000 requirements for selecting wiring systems for a range of circuits, installation conditions and construction methods into which the wiring system is to be installed. Note: Wiring systems include cable enclosures, underground wiring, aerial wiring, catenary support, emergency systems, busbar trunking and earth sheath return.

T4 Maximum demand on consumer’s mains/submains encompassing:

§ acceptable methods for determining the maximum demand on an installation’s consumer’s mains and submains.

§ maximum demand for the consumer's mains for given installations up to 400 A per phase.

§ maximum demand for given submains.

Video 1164

https://www.youtube.com/watch?v=WdlMjnbx34A

Video 1165

https://www.youtube.com/watch?v=Wq0uODypaGI

Video 1166

https://www.youtube.com/watch?v=_dfe1YVMp0c

Video 1167

T5 Cable selection based on current carrying capacity requirements encompassing:

§ installation conditions for a range of wiring systems and applications.

§ external influences that require the use of a derating factor.

§ AS/NZS 3000 requirements for coordination of cables and protection devices.

§ AS/NZS 3008 used to select conductor size based on the maximum current requirement for a given installation condition including any applicable derating factors.

Video 1169

https://www.youtube.com/watch?v=trjobAF5Q9Y

Video 1170

https://www.youtube.com/watch?v=2Awciz5iHE0

Video 1171

https://www.youtube.com/watch?v=4n-GfMK1eQQ

Video 1172

https://www.youtube.com/watch?v=9ZpbhPXujt4

Derating

Video 1173

https://www.youtube.com/watch?v=_ElXlIaSvpU

Video 1174

https://www.youtube.com/watch?v=miOlC9xDiGw

Video 1175

https://www.youtube.com/watch?v=n06qMCeySXc

Video 1176

https://www.youtube.com/watch?v=DMW2wFViVrc

Video 1177

https://www.youtube.com/watch?v=GlGcjRwz2b8

Video 1178

https://www.youtube.com/watch?v=j5RSccpF9SU

Video 1179

https://www.youtube.com/watch?v=pjWz_EyCc34

T6 Cable selection based on voltage drop requirements encompassing:

§ AS/NZS 3000 requirements for maximum voltage drop in an installation.

§ relevant tables in AS/NZS 3008 for unit values of voltage drop.

§ calculation of the expected voltage drop in a given circuit.

§ selecting cables to satisfy voltage drop requirements in addition to current carrying capacity requirements.

T7 Cable selection based on fault loop impedance requirements encompassing:

§ AS/NZS 3000 requirements for maximum fault loop impedance in an installation.

§ relevant tables in AS/NZS 3008 to determine cable impedances.

§ calculation of the expected fault loop impedance for a given circuit arrangement.

§ selecting cables to satisfy fault loop impedance requirements in addition to current carrying capacity requirements and voltage drop requirements.

Video 1180

https://www.youtube.com/watch?v=VOR0R9BXoHc

Video 1181

https://www.youtube.com/watch?v=trjobAF5Q9Y

Video 1182

https://www.youtube.com/watch?v=TcAyFuPKssw

Video 1183

https://www.youtube.com/watch?v=f1NNHgxHiBw

Video 1184

https://www.youtube.com/watch?v=7Ra8siokTAo

Video 1185

T8 Selecting protection devices encompassing:

§ acceptable methods of protection against indirect contact.

§ AS/NZS 3000 requirements for selecting methods and devices to protect against indirect contact for a range of installation types and conditions.

§ coordination between conductors and protection devices to ensures the protection of cables from over heating due to over current.

§ possible injuries to persons and livestock from hazards due to a short circuit.

§ AS/NZS 3000 requirements for selecting devices to protect against overload current for a range of circuits and loads.

§ AS/NZS 3000 requirements for selecting devices to protect against short-circuit current for a range of installation conditions.

§ Video 1186

https://www.youtube.com/watch?v=NCEGf1_agAM

Video 1187

https://www.youtube.com/watch?v=F_WWKCarvwQ

Video 1188

https://www.youtube.com/watch?v=qsacU_JlDHM

Video 1189

https://www.youtube.com/watch?v=OQjHFwCYsk0

Video 1190

https://www.youtube.com/watch?v=bQ6fZrrP0H4

Video 1191

https://www.youtube.com/watch?v=6zhOFTBf1wU

T9 Selecting devices for isolation and switching encompassing:

§ requirements for the provision of the isolation of every circuit in an electrical installation.

§ need for protection against mechanical movement of electrically activated equipment.

§ AS/NZS 3000 requirements for selecting devices for isolation and switching for a range of installations and conditions.

Video 1192

https://www.youtube.com/watch?v=7UsT6qtzDDk

Video 1193

https://www.youtube.com/watch?v=f4guEoibnq8

Video 1194

https://www.youtube.com/watch?v=vpuis-gDki8

T10 Switchboards encompassing:

§ AS/NZS 3000 and local supply authority requirements for switchboards.

§ tariff structures for the supply of electricity.

§ equipment installed at the main switchboards with capacities up to 400 A per phase.

§ layout of a main switchboard for an installation supplied with single phase single tariff whole current metering.

§ layout of a main switchboard for an installation supplied with single phase multiple tariff whole current metering.

§ layout of a main switchboard for an installation supplied with multiphase single tariff whole current metering.

§ layout of a main switchboard for an installation supplied with multiphase multiple tariff whole current metering.

§ layout of a main switchboard for a multiple tenancy installation with whole current metering.

§ layout of a main switchboard, including metering, for an installation supplied with three phase CT metering.

§ local supply authority requirements for connection of an electrical installation to the electrical supply system

Video 1195

https://www.youtube.com/watch?v=PxXlyQegunQ

Video 1196

https://www.youtube.com/watch?v=bJzFdoUfw0U

Video 1197

https://www.youtube.com/watch?v=cGCkXtYhwd8

Video 1198

https://www.youtube.com/watch?v=utYxT_S1piA

Video 1199

https://www.facebook.com/wandmelectrical/videos/a-mechanical-services-switchboard-mssb-i-just-finished-this-one-is-going-into-a-/315308662435843/

Evidence Guide

G033+G063+G107 Week 10 to 15

Electrical Installation

G107	Electrical Equipments Safety Protection
	Electrical Installation Design

G007+G107

Page 164 to 182 of

Electrical Installation requirement

G107

G107 Lesson 1 AS3000 Wiring rule overview.zip

Video 1200

http://youtu.be/WBeeh_p2IQE

G107 Lesson 2 Maximum Demand calculation.zip

Video 1201

http://youtu.be/fseWrbnuQpQ

Video 1202

http://youtu.be/tColhvk-37A

G107 Lesson 3 Cable selection.zip

Video 1203

http://youtu.be/6QyU03nf43U

Video 1204

http://youtu.be/Rjt91zneIYI

G107 Lesson 4 Cable voltage drop calculation.zip

Video 1205

http://youtu.be/5f4_o7eoN9k

Video 1206

http://youtu.be/Mfltp_Lu_Sw

G107 Lesson 5 Derating of cable part 1.zip

Video 1207

http://youtu.be/m8Sngh78Ce8

Video 1208

http://youtu.be/QkhwcGp9Wjo

Video 1209

http://youtu.be/A-RuMsTxEl0

Video 1210

http://youtu.be/7G4vvDzNlVU

Video 1211

http://youtu.be/7V6irU-hamo

G107 Lesson 6 Derating of cable part 2.zip

Video 1212

http://youtu.be/_o4CZZz0FC4

Video 1213

http://youtu.be/_fIKk-406Ew

Video 1214

http://youtu.be/Q1urXsDJ0Rk

G107 Lesson 7 Derating of cable for HRC fuse protection.zip

Video 1215

http://youtu.be/taqemDh06JA

Video 1216

http://youtu.be/k1teYmcnFnM

G0107 Lesson 8 Final subcircuit fault loop impedance.zip

Video 1217

http://youtu.be/rZXlLwDHiTc

Video 1218

http://youtu.be/tTboXVGzxBA

The links contain the following lessons

G107 Lesson 1 AS3000 Wiring rule overview

G107 Lesson 2 Maximum Demand calculation

G107 Lesson 3 Cable selection

G107 Lesson 4 Cable voltage drop calculation

G107 Lesson 5 Derating of cable part 1

G107 Lesson 6 Derating of cable part 2

G107 Lesson 7 Derating of cable for HRC fuse protection

G107 Lesson 8 Final subcircuit fault loop impedance

UEENEEG108A

Workbook

Answer

T1 Troubleshooting concepts

Video 1219

https://www.youtube.com/watch?v=UU0H1KtccsA

Video 1220

https://www.youtube.com/watch?v=ic5R4C5HRUg

Video 1221

https://www.khanacademy.org/science/health-and-medicine/executive-systems-of-the-brain/cognition-lesson/v/problem-solving

Video 1222

https://www.youtube.com/watch?v=DtOoBgQr1ww

Video 1223

https://www.youtube.com/watch?v=oqIhQ5Y0mrg

Video 1224

https://www.youtube.com/watch?v=-lP7WffrO3o

Video 1225

https://www.youtube.com/watch?v=PeOC16IxKwg

Video 1226

https://www.youtube.com/watch?v=rOmeN9CZlQk

T2 Troubleshooting water heater and appliance circuits/equipment

Video 1227

https://www.youtube.com/watch?v=qCXmyhEY_k4

Video 1228

https://www.youtube.com/watch?v=LxnZQZm9YcI

Video 1229

https://www.youtube.com/watch?v=6E-F_dUZgz8

Video 1230

https://www.youtube.com/watch?v=Yx2gfgJB7bI

Video 1231

https://www.youtube.com/watch?v=ZwapTUBP6jw

Video 1232

https://www.youtube.com/watch?v=SlyStHM9Nr0

Video 1233

https://www.youtube.com/watch?v=Samu69sHw8E

Video 1234

https://www.youtube.com/watch?v=TNi9w4bAdRk

Video 1235

https://www.youtube.com/watch?v=9q31SzeVjP0

Video 1236

https://www.youtube.com/watch?v=CGvOheMLsrA

T3 Troubleshooting electrical appliance circuits/equipment

Video 1237

https://www.youtube.com/watch?v=pJkyY8qRRwc

Video 1238

https://www.youtube.com/watch?v=SnRXD-0oXZo

Video 1239

https://www.youtube.com/watch?v=2nQ_pqbb1Tg

Video 1240

https://www.youtube.com/watch?v=wAc8PPw-peI

Video 1241

https://www.youtube.com/watch?v=4XJjbt_kLUY

Video 1242

https://www.youtube.com/watch?v=3hyMggzguwY

Video 1243

https://www.youtube.com/watch?v=r3uJu1CAS5g

T4 Troubleshooting lighting circuits

Video 1244

https://www.youtube.com/watch?v=5ZAya0Zm-NM

Video 1245

https://www.youtube.com/watch?v=3hyMggzguwY

Video 1246

https://www.youtube.com/watch?v=ItChC0ZkFF8

Video 1247

https://www.youtube.com/watch?v=aRQn4W8m_aY

Video 1248

https://www.youtube.com/watch?v=dnpV781c6Sw

T5 Troubleshooting single phase motor and control circuits

Video 1249

https://www.youtube.com/watch?v=EHx04rEB2rc

Video 1250

https://www.youtube.com/watch?v=IxwTOByZ1yM

Video 1251

https://www.youtube.com/watch?v=23kavvzYR7U
Video 1252

https://www.youtube.com/watch?v=2wXgd5sik2I

T6 Troubleshooting three phase induction motor

Video 1253

https://www.youtube.com/watch?v=FUjZwMMoltQ

Video 1254

https://www.youtube.com/watch?v=Csrz5BahZ5M

Video 1255

https://www.youtube.com/watch?v=Zkbn62GALgI

Video 1256

https://www.youtube.com/watch?v=9jYsfi3wDEg

Video 1257

https://www.youtube.com/watch?v=uAhVfVvoK3M

Video 1258

https://www.youtube.com/watch?v=X-ObolWvblQ

Video 1259

https://www.youtube.com/watch?v=Upbz1oUkyxA

T7 Troubleshooting electrical installations

Video 1260

https://www.youtube.com/watch?v=WUt3bdZoZqg

Video 1261

https://www.youtube.com/watch?v=ItChC0ZkFF8

Video 1262

https://www.youtube.com/watch?v=oekBAKyqsW4

Video 1263

https://www.youtube.com/watch?v=Ff679lETOMY

Video 1264

https://www.youtube.com/watch?v=3hyMggzguwY

Video 1265

https://www.youtube.com/watch?v=4XJjbt_kLUY

Electrical Equipment Repairs

G108	Electrical Fault Finding

G008+G009 +G108+G109

Page 190 to 195 of

Fault finding + Electrical control equipments

G008+G009

G008+G009 Lesson 1 AC Machine+AC motor control.zip

Video 1266

http://youtu.be/fwyx6xSOPIs

Video 1267

http://youtu.be/DJ_huMMsVT4

Video 1268

http://youtu.be/pezBHVInm6M

http://www.filefactory.com/file/c386c73/n/G008_G009_Lesson_1_AC_Machine_AC_motor_control.zip

G008+G009 Lesson 2 Synchronous machine+DC machine+Transformer.zip

Video 1269

http://youtu.be/bwxocSr9ptE

Video 1270

http://youtu.be/ohyGNBontLg

Video 1271

http://youtu.be/adm0lWJYlyE

The links contain the following lessons

G008+G009 Lesson 1 AC Machine+AC motor control

G008+G009 Lesson 2 Synchronous machine+DC machine+Transformer

UEENEEG109A

Workbook

T1 Basic relay circuits

Video 1272

https://www.youtube.com/watch?v=E6uE6zZlxS0

Video 1273

https://www.youtube.com/watch?v=clV_HtQenOk

Video 1274

https://www.youtube.com/watch?v=aJScwvP0njU

Video 1275

https://www.youtube.com/watch?v=HBPh6o1JZOo

Video 1276

https://www.youtube.com/watch?v=yMgcL1HG3mg

Video 1277

https://www.youtube.com/watch?v=NP0KjwOWPxk

Video 1278

https://www.youtube.com/watch?v=GjNydNNRIYI

Video 1279

https://www.youtube.com/watch?v=cnPa3_rB9LU

Video 1280

https://www.youtube.com/watch?v=T1o29KTVbTE

Video 1281

https://www.youtube.com/watch?v=FTO5KfIyaO8

T2 Relay circuits and drawing conventions

Video 1282

https://www.youtube.com/watch?v=S3vuNgus4uM

Video 1283

https://www.youtube.com/watch?v=qaI48NCUvkA

Video 1284

https://www.youtube.com/watch?v=TGMj5Yo67WY

Video 1285

https://www.youtube.com/watch?v=Mo-Uai-gDxw

T3 Remote STOP-START control and electrical interlocking

Video 1286

Video 1287

https://www.youtube.com/watch?v=9uMIQycxygQ

Video 1288

https://www.youtube.com/watch?v=541mxiW8LnU

Video 1289

https://www.youtube.com/watch?v=ZdxpVi6FMiI

Video 1290

https://www.youtube.com/watch?v=uNygpiG7SGU

Video 1291

https://www.youtube.com/watch?v=xWshJzvHJ-U

Video 1292

https://www.youtube.com/watch?v=kHbXbK7S188

Video 1293

https://www.youtube.com/watch?v=IHZCKqmLUY8

Video 1294

https://www.youtube.com/watch?v=bBxZnW6szgU

Video 1295

https://www.youtube.com/watch?v=Zq42AkzAJXw

T4 Time delay relays

Video 1296

https://www.youtube.com/watch?v=nTx9n8BNhgQ

Video 1297

https://www.youtube.com/watch?v=ZFiTOcEnUbg

Video 1298

https://www.youtube.com/watch?v=w043mOdIgao

Video 1299

https://www.youtube.com/watch?v=oBXB3Fkyomk

Video 1300

https://www.youtube.com/watch?v=r8voq2Z5apw

Video 1301

https://www.youtube.com/watch?v=LQpIE5uJqm8

Video 1302

https://www.youtube.com/watch?v=R8Q6mUwH05Q

Video 1303

https://www.youtube.com/watch?v=m5_i-77GPgg

Video 1304

https://www.youtube.com/watch?v=Psd5T8kvSyM

T5 Circuits using contactors

Video 1305

https://www.youtube.com/watch?v=WT14nfmu1cI

Video 1306

https://www.youtube.com/watch?v=RjYyAPcr_7k

Video 1307

https://www.youtube.com/watch?v=LgfAbpZTIq4

Video 1308

https://www.youtube.com/watch?v=H2GENSON4IA

Video 1309

https://www.youtube.com/watch?v=541mxiW8LnU

Video 1310

https://www.youtube.com/watch?v=E30g5C-qdmQ&list=PLmmIq86VktYyHfcuZMmXpO1sUHok6YAxQ&index=21

Video 1311

https://www.youtube.com/watch?v=aml0VGzNXEo

Video 1312

https://www.youtube.com/watch?v=gTiOJZalzhY

T6 Jogging and interlocking

Video 1313

https://www.youtube.com/watch?v=oCdjVCNIswM

Video 1314

https://www.youtube.com/watch?v=Gty7rFrsnBg

T7 Control devices

Video 1315

https://www.youtube.com/watch?v=O-OqgFE9SD4

Video 1316

https://www.youtube.com/watch?v=XMfH2P2Fc6Q

Video 1317

https://www.youtube.com/watch?v=2MRu9SQCU_g

Video 1318

https://www.youtube.com/watch?v=aml0VGzNXEo

Video 1319

https://www.youtube.com/watch?v=eBK8lgEd0r0

Video 1320

https://www.youtube.com/watch?v=bsu7Y-1nC8Y

Video 1321

https://www.youtube.com/watch?v=PbAGl_mv5XI

T8 Programmable relays

Video 1322

https://www.youtube.com/watch?v=OcjZIC6aNjI

Video 1323

https://www.youtube.com/watch?v=L8gXYFOA8Uk

Video 1324

https://www.youtube.com/watch?v=jEM2CeI155o

Video 1325

https://www.youtube.com/watch?v=pPiXEfBO2qo

Video 1326

https://www.youtube.com/watch?v=STKH6Rp7rX8

Video 1327

https://www.youtube.com/watch?v=IGlKryPr66s

Video 1328

https://www.youtube.com/watch?v=2OctoNWdgBE&list=PLdM9_LCEQl2A0U6lcBpKpt5khBSS0DaSA&index=34&t=0s

Video 1329

https://www.youtube.com/watch?v=JKvCjDyvuT8

T9 Three-phase induction motor starters

Video 1330

https://www.youtube.com/watch?v=5RAOl5gYj74

Video 1331

https://www.youtube.com/watch?v=IQsAaP331SY

Video 1332

https://www.youtube.com/watch?v=qIgH1layoYk

Video 1333

https://www.youtube.com/watch?v=A06NAZc96bk

Video 1334

https://www.youtube.com/watch?v=CPtyxMTNqP0

Video 1335

https://www.youtube.com/watch?v=9z7be-Ye5PA

T10 Three-phase induction motor starters- reduced voltage

Video 1336

https://www.youtube.com/watch?v=h89TTwlNnpY

Video 1337

https://www.youtube.com/watch?v=sFO_qNtuEDs

Video 1338

https://www.youtube.com/watch?v=DpB-kdM2RA4

Video 1339

https://www.youtube.com/watch?v=KPCzRvU-xzg

Video 1340

https://www.youtube.com/watch?v=i-f7c7KrfeM

Video 1341

https://www.youtube.com/watch?v=x7W05Qgxmh8

Video 1342

https://www.youtube.com/watch?v=h89TTwlNnpY

Video 1343

https://www.youtube.com/watch?v=LfNc48OYBok

Video 1344

https://www.youtube.com/watch?v=PjhhOgud4Lo

Video 1345

https://www.youtube.com/watch?v=3VoxvXb5mSc

Video 1346

https://www.youtube.com/watch?v=iQ4uGLfVnJI

Video 1347

https://www.youtube.com/watch?v=ZADxLxHP0-s

Video 1348

https://www.youtube.com/watch?v=CwA2Idd5e7s

Video 1349

https://www.youtube.com/watch?v=7Cgy_NMw7ls

Video 1350

https://www.youtube.com/watch?v=PfoBSVRo94E

Video 1351

https://www.youtube.com/watch?v=KPCzRvU-xzg

Video 1352

https://www.youtube.com/watch?v=mKEgtk9LzYM

Video 1353

https://www.youtube.com/watch?v=7Cgy_NMw7ls&list=PLoP0dDyFls-VYSb8jXj2yz4vfU8h4M7PJ&index=46

T11 Three-phase induction motor reversal and braking

Video 1354

https://www.youtube.com/watch?v=ZyIbZlXSsFg

Video 1355

https://www.youtube.com/watch?v=P1Rvto-93hE

Video 1356

https://www.youtube.com/watch?v=ZyIbZlXSsFg

Video 1357

https://www.youtube.com/watch?v=o1hEFan6ai4

Video 1358

https://www.youtube.com/watch?v=K-D43CGgHHk

Video 1359

https://www.youtube.com/watch?v=__nS3OelY-s

Video 1360

https://www.youtube.com/watch?v=VqgXVIi0jw8

Video 1361

https://www.youtube.com/watch?v=sO6Heoyq6_g

T12 Three-phase induction motor speed control

Video 1362

https://www.youtube.com/watch?v=-lwupzRMUCA

Video 1363

https://www.youtube.com/watch?v=uRMcnrbGFFc

Video 1364

https://www.youtube.com/watch?v=K3jUTnhzA-Q

Video 1365

https://www.youtube.com/watch?v=1OH1GJbM6CM

Video 1366

https://www.youtube.com/watch?v=mdxFbklpl_c

Video 1367

https://www.youtube.com/watch?v=MiVpnhV4lxQ

Video 1368

https://www.youtube.com/watch?v=a7hXiFP7voc

Video 1369

https://www.youtube.com/watch?v=5RpQINUOBKw

Video 1370

https://www.youtube.com/watch?v=nlPFD3RH0NM

Video 1371

https://www.youtube.com/watch?v=WAKbEVBnvKc

UEENEEE107A

Workbook

E107 Answers

KS01-EE107A Drawings, diagrams and schedules

T1 Architectural drawings

Video 1372

https://www.youtube.com/watch?v=HEo0NqYputQ

Video 1373

https://www.youtube.com/watch?v=s8rm_VPbMPk

Video 1374

https://www.youtube.com/watch?v=JTaz4f8oxkE

Video 1375

https://www.youtube.com/watch?v=24rnfO8s0hU

Video 1376

https://www.youtube.com/watch?v=y27mM7R9Xho

Video 1377

https://www.youtube.com/watch?v=-Q_C4uF-BHU

Video 1378

https://www.youtube.com/watch?v=ONxwltuV89k

Video 1379

https://www.youtube.com/watch?v=WiCTVVhD5D0

Video 1380

https://www.youtube.com/watch?v=eNNAnSCrrBI

Video 1381

https://www.youtube.com/watch?v=BrNQ0XixAw0

T2 Electrical drawings

Video 1382

https://www.youtube.com/watch?v=Ua2IK-PCfUU

Video 1383

https://www.youtube.com/watch?v=zTo8QL7A-wg

Video 1384

https://www.youtube.com/watch?v=AoIb3zPTxdc

Video 1385

Video 1386

https://www.youtube.com/watch?v=52JoONLGl2s

Video 1387

https://www.youtube.com/watch?v=Z05xuqhGNZ8

Video 1388

https://www.youtube.com/watch?v=YATrLcxicw4

Video 1389

https://www.youtube.com/watch?v=D50db0tawgY

Video 1390

https://www.youtube.com/watch?v=2f6YDcS1j2c

Video 1391

https://www.youtube.com/watch?v=KXcd6ufVzyE

T3 Circuit diagrams

Video 1392

https://www.youtube.com/watch?v=52JoONLGl2s

Video 1393

https://www.youtube.com/watch?v=j0zf-otH3cY

Video 1394

https://www.youtube.com/watch?v=_Thx9uTSW2g

Video 1395

Video 1396

https://www.youtube.com/watch?v=TFD8ZqXujsE

Video 1397

https://www.youtube.com/watch?v=-0dUYRtozzs

Video 1398

https://www.youtube.com/watch?v=5_O9i2VarXg

Video 1399

https://www.youtube.com/watch?v=Dl1gFBNa0Ik

Video 1400

https://www.youtube.com/watch?v=Pq83O2Z1yF0

Video 1401

https://www.youtube.com/watch?v=KXcd6ufVzyE

T4 Wiring diagrams

Video 1402

https://www.youtube.com/watch?v=TFD8ZqXujsE

Video 1403

Video 1404

https://www.youtube.com/watch?v=hmBn_SG5pms

Video 1405

https://www.youtube.com/watch?v=UbsiKI4upBM

Video 1406

https://www.dailymotion.com/video/x2l8svg

T5 Building construction drawings and diagrams

Video 1407

https://www.youtube.com/watch?v=knLXXSDte8k

Video 1408

https://www.youtube.com/watch?v=RitDpwVpNVQ

Video 1409

https://www.youtube.com/watch?v=HEo0NqYputQ

Video 1410

https://www.youtube.com/watch?v=Y2hJDIUgVZU

Video 1411

https://www.youtube.com/watch?v=w0PY1T9HUbE

Video 1412

https://www.youtube.com/watch?v=R7YxG4nsqeg

Video 1413

https://www.youtube.com/watch?v=rIhfw-ngyZI

KS02-EE107A Introduction to regulations, compliance standards and codes

T1 Regulation for undertaking electrical work

Video 1414

https://www.youtube.com/watch?v=aNPnBEqbq7A

Video 1415

https://www.youtube.com/watch?v=8fn0Rg_YC7w

Video 1416

https://www.youtube.com/watch?v=j-BBzO37aSQ

Video 1417

https://www.youtube.com/watch?v=TByRI5FwUL0

Video 1418

https://hcrcflyers.com/index.php/spectrumrc-videos/spektrum-as3000-switch-setup-tutorial

T2 Standards philosophy and format

Video 1419

https://www.youtube.com/watch?v=cJo4wXAQGuw

Video 1420

https://www.youtube.com/watch?v=ZipOu72HGkU

T3 Purpose, format and content of typical job specifications

Video 1421

https://www.youtube.com/watch?v=uN5USQw3kvQ

Video 1422

https://www.youtube.com/watch?v=dw3CrHMtzMk

FINAL TUTORIALS

KS02-EG105A Electrical installations and equipment — principles and requirements

Evidence shall show an understanding of electrical installations and equipment principles and requirements to an extent indicated by the following aspects:

T1 Effects of electric current encompassing:-------------------------------E101

· Physiological effects of current.

· Basic principles by which an electric current can produce heat, light, motion and a chemical reaction.

T2 Single path practical circuit encompassing:----------------------------E104

· Arrangement of energy source, protection device, switch and load in a circuit.

· The purpose of each component in the circuit.

· Consequences of an open-circuits, closed-circuits and short-circuits.

T3 Single-source multiple-path d.c. circuits encompassing: :----------------------------E104

· Circuit configurations and connection.

· Relationship between the parameters of voltage, current, resistance and power dissipation in the whole or any part of the circuit.

· Safely measuring the parameters for the whole or any part of the circuit.

· Methods of determining circuit behaviour for variation in any of the parameters from measured and calculated values.

T4 Alternating voltage and current generation, phase relationships, energy in an a.c. circuit encompassing: :----------------------------G102

· Sinusoidal voltage generation and resulting current.

· The terms period; maximum value; peak-to-peak value; instantaneous value; average value; root-mean-square (r.m.s.) value; and frequency.

· Three-phases generation.

· Relationship between the phase voltages generated in a three-phase alternator and the conventions for identifying each.

· Method of determining the phase sequence or phase rotation of a three-phase supply.

· Methods of determining power and energy supplied by three phase circuits.

T5 Fundamental safety principles of the AS/NZS 3000 Part 1 (Section 1) and deemed to comply solution given in Part 2 encompassing: :----------------------------E101+137

· Definition of terms

· Fundamental safety principles of protection against direct and indirect contact with live parts; thermal effects; overcurrent; earth faults; abnormal voltages; spread of fire; mechanical injury and external influences.

· Fundamental principles of installation design; selection and installation of equipment; means of compliance (including alterations, additions and repairs) and verification of compliance.

T6 Electric motor selection, starting method and overload protection encompassing:

:----------------------------G006

· Types of motor enclosures suitable for given environmental conditions

· Criteria for selecting motor starters and overload protection.

· Types and connection arrangements for direct-on-line and reduced voltage starters.

· Thermal, magnetic and thermistor overload protection methods.

T7 Ability to apply AS/NZ 3000 requirements for protective and functional earthing encompassing: :----------------------------G063+G107+G103

· Purpose of protective and functional earthing.

· Parts of the protective earthing systems.

· Earthing arrangements, earthing of equipment and equipotential bonding.

· Methods of determining the maximum fault loop impedance for a circuit.

· Selection of protective conductor and active conductor sizes for each circuit to ensure earth-fault loop impedance is sufficiently low to operate the circuit protective device.

T8 MEN system and its application encompassing: :----------------------------G063+G107+G103

· The roles of the protective earthing (PE) and neutral (N) conductors in an a consumer’s installation and their relationship to the protective earth neutral (PEN) conductor in the electricity distributor’s system or sub-main to an outbuilding.

· The importance of the MEN link when a fault occurs.

· The likely consequences of the absence of the MEN link or high impendence in the PEN conductor when a fault occurs.

· The requirements for installation of an MEN link in an installation and an outbuilding.

T9 Knowledge of the application of transformers encompassing: :----------------------G006

· Transformers used in distribution and transmission systems and large consumer installations.

· Transformers used in welding machines.

· Applications in appliances

· Risks and safety control measures associated with connection and disconnection of instrument transformers

· Safe working procedures when connecting and testing transformers.

· AS/NZS 3000 requirements and restriction on the installation and use of transformers.

T10 Ability to apply AS/NZ 3000 requirements for protection of circuit against overcurrent and abnormal voltages encompassing: :--------------------------G063+G107+G103

· Minimum fault levels specified by electricity distributors

· Methods and arrangement for protection against short-circuit currents and overload currents.

· Coordination of overload and short-circuit protection devices.

· Coordination between conductors and overload protection devices.

· Causes of over and undervoltage.

· Device and requirements for protection against over and undervoltage.

T11 Additional protection by use of RCDs and use of extra-low voltage for basic and fault protection encompassing: :----------------------------G063+G107+G103

· Limitation of an RCD to protect against contact with live parts

· AS/NZS 3000 requirements for use of RCDs.

· Conditions for use of extra-low voltage to provide for basic and fault protection

· AS/NZS 3000 requirements for installation of SELV and PELV systems

T12 Ability to select cables for single and three phase mains and sub-mains for single and multiple installations that comply with requirements of AS/NZS 3000 and AS/NZS 3008.1 encompassing: :----------------------------G063+G107+G103

· Methods of determining maximum demand.

· Types of cables available.

· Installation methods and external influences effecting cable current-carrying capacity

· Voltage drop limitation

· Short-circuit performance consideration.

T13 Ability to select cables for final sub-circuits that comply with requirements of AS/NZS 3000 and AS/NZS 3008.1 encompassing: :--------------------------G107

· Maximum demand of final sub-circuits.

· Types of cables available.

· Installation methods and external influences effecting cable current-carrying capacity

· Effect of earth-fault loop impedance and voltage drop limitations on circuit route length.

· Short-circuit performance considerations.

T14 Ability to apply AS/NZS 3000 requirements for control and protection of installations encompassing: :----------------------------G063+G107+G103+G109

· Devices for functions of isolation; emergency; Mechanical maintenance and functional control.

· Method for assessing prospective short circuit current.

· Devices and arrangement for protection against overload and short-circuit current.

· Additional protection by RCD

· Protection against switchboard internal arc faults.

T15 Ability to apply AS/NZS 3000 requirements for the installation of electrical equipment in given damp situations encompassing: :--------------------------G063+G107+G103

· Limitation of installation of equipment in classified zones.

· Selection and location of equipment suitable for installation in given classified zones.

· Additional protection by RCD.

· Equipotential bonding in showers and bathrooms and swimming and spa pools.

T16 Ability to install, modify and test electrical equipment for construction and demolition sites, complying with AS/NZS 3012 and applicable workplace safety legislation encompassing: :----------------------------G063+G107+G103

· Supply and installation requirements.

· Protection of circuits.

· Initial and periodic inspection and testing

· Portable tool safety testing and tagging system in accordance with AS/NZS 3760.

T17 Knowledge of AS/NZS 3000 requirements for the installation of aerial conductors and underground wiring encompassing: :----------------------------G063+G107+G103

· Types and application of aerial conductors

· Aerial span limitations and required clearances

· Selection of aerial supporting poles/post and struts for a given application.

· Use and requirements of catenary support systems

· Acceptable cable types and protection for underground wiring categories.

· Underground wiring depth layer and protection

· Underground wiring clearances from other services

T18 Knowledge of AS/NZS 3000 requirements for electrical installations in hazardous areas encompassing: :----------------------------G063+G107+G103

· Types of areas classified as a hazardous area

· Standards to which the selection, installation and maintenance of electrical equipment shall comply.

· Additional training required to work competently with electrical equipment for hazardous areas

· T19 Ability to verify compliance of an electrical installation in accordance with AS/NZS 3000 encompassing: :----------------------------G063+G107+G103

· Visual inspection to determine whether the installation complies with requirements set out in Section 2 to 7 of AS/NZS 3000 and relevant specific installation standards.

· Mandatory tests following guidance given in AS/NZS 3017

T20 Ability to perform effective safe isolation of any equipment encompassing: :------------------------G063+G107+G103

· Preparation of a ‘safe work method statement’ (SWMS) or Job Safety Analysis (JSA) for effective safe isolation.

· Safe methods for identifying source of supply to be isolated.

· Switching-off, lock-out and tagging procedures.

· Safe methods for confirming effective and safe isolation

T21 Ability to apply AS/NZS 3000 requirements to install and terminate thermoplastic insulated cables; elastomer sheathed cables; XLPE sheathed cables; and high temperature cables; armoured cables; and neutral screened cables in a wide range of applications.

T22 Ability to perform the circuit tests required for electrical cables in a range of installations and final sub-circuit encompassing: :-------------------G033+-G063+G107+G103

· Following safe testing procedures.

· Tests to show if the earth continuity and earth-fault loop impedance are sufficiently low.

· Testing to show if insulation resistance is sufficiently high.

· Testing to show if the polarity and circuit connections are correct.

T23 Ability to install final sub-circuit wiring into switchboards and connect to switchboard equipment in accordance with AS/NZS 3000 and electricity distributor’s requirements.

:----------------------------G063+G107+G103

T24 Ability to apply AS/NZS 3000 and electricity distributor’s requirements for the installation and connect consumers mains encompassing: :------------------G063+G107+G103

· Installing of underground and overhead consumers mains

· Terminating consumers mains at pillars, pits mains connection boxes and consumers switchboard.

· Install unprotected consumers mains to reduce the risk of short-circuit current to a minimum.

· Installing bonding conductors where required.

T25 Ability to read, sketch and interpret electrical diagrams encompassing: :-----------E107

· Purpose and characteristics of schematic, block and wiring diagrams, plans and schedules.

· Conventions used in documenting electrical information

· Read and interpret schematic, block and wiring diagrams, plans and schedules

· Sketch electrical diagrams using conventional symbols

T26 Knowledge and understanding occupational safety and health encompassing: :--E101

· Basics of Occupational Safety and Health regulations

· Legal responsibilities for employers and employees

· Employers’ and employees’ own “duty of care”.

· Safety committees and their role

T27 Knowledge and understanding of the requirements for personal safety in the workplace encompassing: -E101

· Purpose and use of Safe Work Method Statements (SWMS) or Job Safety Analysis (JSA).

· Purpose and process of reporting OHS incidents.

· Safety procedures for working with electrical circuits and equipment.

· Procedures for safe and effective isolation of electrical supply.

· Regulations for the supervision of apprentices and trainees.

T28 Process in rescuing a person in contact with live electrical conductors or equipment and the primary importance of the safety of the rescuer. -E101

T29 Application of emergency first aid requirements for an electric shock victim encompassing: -E101

· Calling for help.

· Applying cardiopulmonary resuscitation (CPR).

· Selection and use of fire extinguishers to control electrical fire at accident site.

T30 Dangers of high voltage equipment and distribution systems encompassing: -E101

· Step and touch and induced voltages.

· Sources of induced voltage and stored energy

· Creepage and clearance requirements.

· Application of safe working procedures in the vicinity of HV equipment.

T31 Systematic method of commissioning and decommissioning electrical equipment and installations encompassing: :------------------G063+G107+G103+G006

· Commissioning safety procedures

· Circuit voltage testing

· Phase rotation checks

· Functional testing

· Instrument and control parameter settings

· Decommissioning safety procedures.

· Identification of circuits with their control and protection devices.

· Impact of isolation on other parts of an installation.

· Tagging, testing and earthing.

· Safe removal of equipment.

T32 Diagnosing and rectifying faults in electrical apparatus and associated circuits encompassing:------------------G108

VIDEOS

Video 1423

https://www.youtube.com/watch?v=mhPZVOTHC8Q

Video 1424

https://www.youtube.com/watch?v=d5Z06c7tSx4

Video 1425

https://www.youtube.com/watch?v=nWXg6BsQ06U

Video 1426

https://www.youtube.com/watch?v=E_AWcu9r3YI

Video 1427

https://www.youtube.com/watch?v=f4quQFOZ4as

Video 1428

https://www.youtube.com/watch?v=XJqfwMgfHn0

Video 1429

https://www.facebook.com/tafedigital.electrotechnology/videos/sample-of-capstone-exam-question/1118555261500853/

Video 1430

https://www.youtube.com/watch?v=bo43Wjnrjsg

Testing

Inspection and Testing

Video 1431

https://www.youtube.com/watch?v=Dwbh7mEgvcI

Video 1432

https://www.youtube.com/watch?v=2g6d9QQEDQk

Wiring Installation Testing

Video 1433

https://www.youtube.com/watch?v=E_AWcu9r3YI

Video 1434

https://www.youtube.com/watch?v=eNfkl8Ax74k

Video 1435

https://www.youtube.com/watch?v=dPD7PJNN_Kg

Video 1436

https://www.youtube.com/watch?v=hkFm7QCu16Y

Video 1437

https://www.youtube.com/watch?v=HddUI4nS-O0

Video 1438

https://www.youtube.com/watch?v=cXlVVgsp64c

Video 1439

https://www.youtube.com/watch?v=O4Uc_9ZpdAM

Insulation Resistance Test

Video 1440

https://www.youtube.com/watch?v=phKS_LQMs18

Video 1441

https://www.youtube.com/watch?v=_-n6BiFJy8w

Australian Switchboard

Video 1442

https://www.youtube.com/watch?v=ieIVhHgsF1A

Testing Tester

Video 1443

https://www.youtube.com/watch?v=alCjuNZDP9M

Polarity Testing

Video 1444

https://www.youtube.com/watch?v=QHsnZ0RetE4

Video 1445

https://www.youtube.com/watch?v=X5VEtGTSrwg

Video 1446

https://www.youtube.com/watch?v=u40QLnbdA-0

Video 1447

https://www.youtube.com/watch?v=s8au8ves-SY

Video 1448

https://www.youtube.com/watch?v=pHIzBSMjy2I

Video 1449

https://www.youtube.com/watch?v=Bniflf9INjo

Video 1450

https://www.youtube.com/watch?v=qyAPIui38HE

Video 1451

https://www.youtube.com/watch?v=ODJ1J2lIzhE

Video 1452

https://www.youtube.com/watch?v=F0CFKl6Cypw

Video 1453

https://www.youtube.com/watch?v=giSr_opxSx8

Video 1454

https://www.youtube.com/watch?v=AG5KPuPRLSo

Video 1455

https://www.youtube.com/watch?v=TaeDg9cgjTU

Hot Neutral Wire Test

Video 1456

https://www.youtube.com/watch?v=S9MNHnBD6E4

Continuity Polarity Test Intermediate Lighting Circuit

Video 1457

https://www.youtube.com/watch?v=LcJu2tlhpiI

Video 1458

https://www.youtube.com/watch?v=dMtxkhL6c8I

Video 1459

https://www.youtube.com/watch?v=TjWcghmw464

Outlet Polarity Test

Video 1460

https://www.youtube.com/watch?v=dbEvvcvYFiY

Video 1461

https://www.youtube.com/watch?v=ELiTfD6ehuI

Video 1462

https://www.youtube.com/watch?v=kmIzxOMfAXg

Video 1463

https://www.youtube.com/watch?v=01KmCrXrZGk

Video 1464

https://www.youtube.com/watch?v=IcsLy9k15pA

Video 1465

https://www.youtube.com/watch?v=WOCTOGlJeEc

ST007

Video 1466

https://www.youtube.com/watch?v=mYP-bbkC8Mw

Fixing Reverse Polarity Socket

Video 1467

https://www.youtube.com/watch?v=EZ4hO41jZEE

RCCB Polarity Test

Video 1468

https://www.youtube.com/watch?v=ODJ1J2lIzhE

Parallel Earth Path Testing

Video 1469

https://www.youtube.com/watch?v=r94dJ7ASRTY

Radial Socket Outlet Test

Video 1470

https://www.youtube.com/watch?v=Tcwm6NBBvCs

AC Power Cord

Video 1471

https://www.youtube.com/watch?v=lKkrjWPVz9I

Main Polarity Test

Video 1472

https://www.youtube.com/watch?v=1mGsn1BCPzA

Smoke Detector Polarity Test

Video 1473

https://www.youtube.com/watch?v=9GjXVCtfVBI

Testing Ring Final Sub circuit

Video 1474

https://www.youtube.com/watch?v=BKyK0-_v5xc

Sure Test Analyzer

Video 1475

https://www.youtube.com/watch?v=_04HmpFBxdQ

Ring Final Sub Circuit Test

Video 1476

https://www.youtube.com/watch?v=KrkPiAHy6pc

Video 1477

https://www.youtube.com/watch?v=uPKksOxQTPI

Phase Rotation Sequence Testing

Video 1478

https://www.youtube.com/watch?v=S9h3z9HPZcA

Ethernet Cable Terminating

Video 1479

https://www.youtube.com/watch?v=wqKYi_RqTAQ

Transformer Polarity

Video 1480

https://www.youtube.com/watch?v=Yd37yMbqDq0

Generator with Floating Neutral

Video 1481

https://www.youtube.com/watch?v=Wr3ZKDN-8Go

Three Phase Induction Motor

Video 1482

https://www.youtube.com/watch?v=lafsc0kd6rA

Earth Fault Loop Impedance Testing

Video 1483

https://www.youtube.com/watch?v=caUVdKWH2hs

Video 1484

https://www.youtube.com/watch?v=_twVvsGo81A

Radial Circuit Continuity Test

Video 1485

https://www.youtube.com/watch?v=TyznESlF190

Electrical Power Tester

Video 1486

https://www.youtube.com/watch?v=_aNhx-pru1A

RCD Testing

Video 1487

https://www.youtube.com/watch?v=d9ftjAQ6znQ

ELCB Testing

Video 1488

https://www.youtube.com/watch?v=WOCTOGlJeEc

Hall Effect Sensor

Video 1489

https://www.youtube.com/watch?v=E5eNHewAee8

ELECTRICAL TESTING

Electrical Inspection and Testing

Video 1490

https://www.youtube.com/watch?v=rnvNfI__kYU&list=PLvyQJOWqmaEg5blPB8jA8WlTXtKENUfsA

Main Protective Bonding Test

Video 1491

https://www.youtube.com/watch?v=rnvNfI__kYU&list=PLSVLgJeK7oWvP9rycMH4Cfp-EwEMz-KN0&index=1

Protective Summary Bonding Test

Video 1492

https://www.youtube.com/watch?v=v38PfIVy2rI&list=PLSVLgJeK7oWvP9rycMH4Cfp-EwEMz-KN0&index=2

R1 R2 Test

Video 1493

https://www.youtube.com/watch?v=S-C8cwSA8Vg&list=PLSVLgJeK7oWvP9rycMH4Cfp-EwEMz-KN0&index=3

3 Phase R1 R2 Test

Video 1494

https://www.youtube.com/watch?v=D8kYm1Do59w&list=PLSVLgJeK7oWvP9rycMH4Cfp-EwEMz-KN0&index=4

Ring Final Sub Circuit Test

Video 1495

https://www.youtube.com/watch?v=uPKksOxQTPI&list=PLSVLgJeK7oWvP9rycMH4Cfp-EwEMz-KN0&index=5

Single Phase Insulation resistance Test

Video 1496

https://www.youtube.com/watch?v=eRE_8njFxZs&list=PLSVLgJeK7oWvP9rycMH4Cfp-EwEMz-KN0&index=6

Polarity Testing on lighting

Video 1497

https://www.youtube.com/watch?v=pHIzBSMjy2I&list=PLSVLgJeK7oWvP9rycMH4Cfp-EwEMz-KN0&index=8

Electrode test

Video 1498

https://www.youtube.com/watch?v=oYb2jqD7cH4&list=PLSVLgJeK7oWvP9rycMH4Cfp-EwEMz-KN0&index=9

Protective Supplementary Bonding Test

Video 1499

https://www.youtube.com/watch?v=v38PfIVy2rI

Video 1500

https://www.youtube.com/watch?v=CVxBettQpPU

Testing Continuity of CPC

Video 1501

https://www.youtube.com/watch?v=Lt0JK2xVhjk

Insulation Resistance Test

Video 1502

https://www.youtube.com/watch?v=yY8nsGn2xBo

Video 1503

https://www.youtube.com/watch?v=Ek1u2RjQffU

Earthing and Bonding

Video 1504

https://www.youtube.com/watch?v=UeF3PYM1M7c

RCD Test

Video 1505

https://www.youtube.com/watch?v=PfcPDr1SSZ4

Single Phase Insulation Resistance Test

Video 1506

https://www.youtube.com/watch?v=eRE_8njFxZs&list=PLSVLgJeK7oWvP9rycMH4Cfp-EwEMz-KN0&index=6

3 Phase Insulation Resistance Test

Video 1507

https://www.youtube.com/watch?v=yyLsBfTdxOw&list=PLSVLgJeK7oWvP9rycMH4Cfp-EwEMz-KN0&index=7

TT System Test

Video 1508

https://www.youtube.com/watch?v=q9dlmp-KjQo&list=PLSVLgJeK7oWvP9rycMH4Cfp-EwEMz-KN0&index=10

Earth Fault Loop impedance Test

Video 1509

https://www.youtube.com/watch?v=vtZpe4_Go78&list=PLSVLgJeK7oWvP9rycMH4Cfp-EwEMz-KN0&index=11

Phase Rotation Sequence Test

Video 1510

https://www.youtube.com/watch?v=S9h3z9HPZcA&list=PLSVLgJeK7oWvP9rycMH4Cfp-EwEMz-KN0&index=14

Voltage Test on Photovoltaics arrays

Video 1511

https://www.youtube.com/watch?v=fu41IMBOjNg&list=PLSVLgJeK7oWvP9rycMH4Cfp-EwEMz-KN0&index=15

Photovoltaics Short Circuit Test

Video 1512

https://www.youtube.com/watch?v=hOjcaKmR4lE&list=PLSVLgJeK7oWvP9rycMH4Cfp-EwEMz-KN0&index=16

Insulation Resistance Test on Photovoltaics Arrays

Video 1513

https://www.youtube.com/watch?v=EcZFr9GeYu0&list=PLSVLgJeK7oWvP9rycMH4Cfp-EwEMz-KN0&index=17

City & Guild Test and Inspection

Video 1514

https://www.youtube.com/watch?v=OtFsmL-Nszc&list=PLSVLgJeK7oWvP9rycMH4Cfp-EwEMz-KN0&index=18

UEENEEC020B Participate in electrical work and competency development activities

KS01-EC020B Electrical work competency development activities

Evidence shall show an understanding of electrical work competency development activities to an extent indicated by the following aspects:

T1. Responsibilities under a competency development plan:

· Competency Development (Training) Plans encompassing:

· state/territories requirements (acts/regulations)

· competency development (training) contracts

· competency development (training) period

· purpose of competency development (training) plans

· process in developing competency development (training) plans

· parties involved in the competency development (training) plan

· Qualification Structure encompassing:

· scope of work

· Training Packages - electrotechnology

· competency standard units (CSUs)

· structure of Qualification

· off-Job Requirements

· on-Job Requirements

· Responsibilities of Parties to the contract encompassing:

· employer responsibilities

· learner responsibilities

· RTO responsibilities

· State Training Authorities (STA)

· Electrotechnology Industry Career Opportunities encompassing:

· industry Areas

· qualification levels

· career paths

· Industry customs and practices encompassing:

· industry bodies – employer and employee representatives

· regulatory bodies – including licensing/registration, OHS, IR, training authorities – apprentice/trainee regulation

· vocational and technical education system – Australian Qualification Framework (AQF), credentials, Australian Qualification Training Framework (AQTF)

· Monitoring of Workplace Evidence encompassing:

· workplace exposure and practices and relationship with competency standard units

· methods of collecting workplace evidence

· monitoring period cycle

· requirements of workplace evidence

· actions taken for unsatisfactory progression

· role of state training authority (STA)

· apprentice/learner responsibilities

· employer responsibilities

· RTO Policies encompassing:

· apprentice/Learner Responsibilities

· teachers/Trainers Responsibilities

· absenteeism

· off-Job component assessment specifications

· on-Job component assessment specifications

· qualification completion requirements and award

· advanced standing and/or RPL

· result review procedures

· Apprentice/Learner Discipline Policy encompassing:

· apprentices/Learners rights

· apprentice/Learner responsibilities

· breaches of discipline

· types of penalties Apprentice/Learner Responsibilities

· Attendance at the Vocational and Technical Education Centre encompassing:

· importance of attendance

· record management of attendance

· attendance cards

· advice to employer of absences

· Fire and Emergencies at the Vocational and Technical Education Centre encompassing:

· designated fire and emergency exists

· procedures in the event of a fire

· evacuation procedures

· assembly points importance of attendance

· Occupational Health and Safety at the Vocational and Technical Education Centre encompassing:

· eye protection

· foot protection

· protective clothing

· personal injuries

· mobile phones and personal belonging

· dress regulations

· rotating machinery, designated fire and emergency exists

· Entry Requirements encompassing:

· numeracy requirements

· literacy requirements

· vocational and technical education centre support mechanisms

· testing and appropriate action by learner Eye protection

· Vocational and Technical Education Centre Tour encompassing:

· vocational and technical education centre layout

· building layout

· tour of building and vocational and technical education centre

T2. Methods of monitoring and reporting competency development activities encompassing:

· RTOs responsibility to receive and monitor workplace activities of the apprentice/learner

· Industry requirements for monitoring workplace evidence

· Acceptable methods for monitoring and reporting workplace activities

· Apprentice’s/Learner’s responsibility to participate in the reporting of workplace activities

· RTOs requirements in periodically evaluating development of apprentices/learners from the workplace activities information gathered, and providing feedback and advice on areas requiring improvement

· Employers responsibilities to participate in monitoring, reporting and confirming workplace activities, and assisting in overcoming areas requiring development by the apprentice/learner

· Options for appeal or assistance from RTO or State Training Authority (STA)

T3. Enterprise work activities policies and procedures encompassing:

· Need for policies and procedures

· Scope for an industry/enterprise to establish work activity policies and procedures - policies and procedure related to safety, effective work outcomes, customer relations, conflict resolution and competency development.

Following work activities procedures

Copy and paste the following table for each element as required

Elements & Performance Criteria			Assessment event(s)
Element(s)	PC No	Performance Criteria (PC)	Training Documents	Performance Monitoring	Academic Record Assessment

1.Participate in the development of a personal competency development plan.	1.1	The nature of competency-based training is sought from discussions with appropriate persons and understood.	Training Plan
	1.2	The responsibilities/obligations of trainees/learners, their employers, trainers and assessors in a competency-based development program are sought from discussions with appropriate persons and understood.	Training Plan
	1.3	Competencies to be achieved in a personal competency development plan are established in discussions with appropriate persons.	Training Plan
	1.4	Details on how to achieve the individual competencies in the plan are sought from discussions with appropriate persons and understood.	EBS Timetables
2. Follow a personal competency development plan.	2.1	All aspects of the competency development plan are put into practice and followed diligently	EBS Timetables	EBS Assessment and Attendance records	EBS Academic results
	2.2	Opportunities to practise skills and apply knowledge relative to a particular competency are pursued	Work Records	e-Profiling
	2.3	Assistance is sought from appropriate persons to overcome difficulties in develop skills and apply knowledge relevant to a particular competency.	Head Teacher’s advice	Regular section meetings	Regular feedback by unit teachers in the course
	2.4	Progress in competency development is self monitored against the competency development plan.	TAFE-NSW Student Portal	Self monitoring of the results	TAFE-NSW Academic Transcripts
	2.5	Modifications to the personal competency development plan are made in consultation with appropriate persons.	Unit and course evaluation	Assessment validation of the section	Collaboration with ASQA
	2.6	Trainee/learners responsibility for periodic and timely reporting of competency development activities is followed.	Trainees’ entries of e-Profiling	TAFE-Attendance Card	Report to employers

Add rows to the following table as required

Performance Evidence	Training Documents	Performance Monitoring	Academic Record Assessment
Competency Development (Training) Plans	EBS records
Qualification Structure	Semester Timetable
Responsibilities	Information to students	Course documents provided to students and accepting feedback and providing the guidance and advice by head teacher and teachers
Electrotechnology Industry Career Opportunities	TAFE-NSW Career service	Circulating job opportunities information
Industry customs and practices	Regular industry Liaison
Monitoring of Workplace Evidence	Workplace document collection for relevant units
RTO Policies	TAFE-NSW Policies	Electrical Trades Section Disciplines
Apprentice/Learner Discipline Policy	Students Discipline Instructions issued by Electrical Trades Section	Reporting the absentees to the employers	Monitoring of both paper based and EBS Roll books
Attendance at the Vocational and Technical Education Centre	Monitoring of both paper based and EBS Roll books	EBS Students Attendance and Class Registers	Reporting the absentees to the employers
Fire and Emergencies at the Vocational and Technical Education Centre	Fire, Evacuation and Lockdown instruction of TAFE-NSW	Ultimo Campus Emergency Drills	Electrical Trades Section Electrical and Fire Safety Plans and Instructions
Occupational Health and Safety at the Vocational and Technical Education Centre		Electrical Trades Section Safety Instruction, Safety gear instructions	Assessing pre-requisites regarding OHS Completion of OHS Units in the course
Entry Requirements	As per Course Information	TAFE-NSW Course Information Website Accepting feedback and providing the guidance and advice by head teacher and teachers	Pre-requisite check before allowing the student to do the specific unit.
Vocational and Technical Education Centre Tour	Students orientation session
Methods of monitoring and reporting competency development activities	TAFE-NSW Academic Transcript	Regular checking of class registers and students attendance	Checking of academic records and entry of data for this unit in EBS by Head Teacher or nominated teacher

Add rows to the following table as required

Knowledge Evidence	Training Documents	Performance Monitoring	Academic Record Assessment
Occupational Health and Safety workplace procedures and practices, including the use of risk control measures			Completion of UEENEEE101A
Sustainable energy principles and practices			Completion of UEENEEK145A
Australian Qualification Framework (AQF), credentials, Australian Qualification Training Framework (AQTF)	Providing the information in TAFE-NSW Website	Providing the information by Teaching Section
Role of state training authority (STA)	Providing the information in TAFE-NSW Website	Providing the information by Teaching Section
Anti Discrimination legislation, regulations, polices and workplace procedures	Providing the information in TAFE-NSW Website	Providing the information by Teaching Section

Add rows to the following table as required

Assessment Conditions	Training Documents	Performance Monitoring	Academic Record Assessment
Students performance in monitoring of progress	Througout the course	Througout the course	At the end of each semester and before entering the result for this unit
Assessing the academic results of the students in the course	Througout the course	Througout the course	At the end of each semester and before entering the result for this unit
Liaison with employers	Througout the course	Througout the course	Througout the course
Assessing work place evidences and e-Profiling system	Througout the course	Througout the course	Througout the course

POWER UNITS-IS67+68

Electrical Power Systems I

IS67	Electrical Power System

IS74	Power System Protection

G015/ IS67+68+ IS74

Page 196 to 231 of

G015(AA)Lesson 1-Distribution system.zip

Power System (1)

Video 1515

http://youtu.be/VuzjXkRx4UI

G015(AA)Lesson 2-Demand factor.zip

Video 1516

http://youtu.be/cUGbxhBT-Dc

Video 1517

http://youtu.be/DCCl4cO3Vu8

G015(AA)Lesson 3-Sag.zip

Video 1518

http://youtu.be/1s496h-Iuu8

G015(AA)Lesson 4-OH Line mechanical design.zip

Video 1519

http://youtu.be/T0BnyqV9T6E

Video 1520

http://youtu.be/hu1TrUv2_OY

G015(AA)Lesson 5-UG Cable.zip

Video 1521

http://youtu.be/hHCLzMnVmT0

Video 1522

http://youtu.be/A5AieaBBZHo

G015(AA)Lesson 6-Voltage control.zip

Video 1523

http://youtu.be/y1vTM5fvfyU

Video 1524

http://youtu.be/Z9HBGsVgymA

G015(AE)Lesson 1-Power system protection scheme.zip

Video 1525

http://youtu.be/ihpd3cDAhBU

Video 1526

http://youtu.be/EGXkLRM2L9M

Video 1527

http://youtu.be/zOIUYQ7OJfs

G015(AE)Lesson 2-Differential relay.zip

Video 1528

http://youtu.be/2iW0oEScMsw

G015(AE)Lesson_3-Over_current_&_earth_fault_protection.zip

Video 1529

http://youtu.be/hvGjdO9jEhk

G015(AE)Lesson 4-Three phase differential relay.zip

Video 1530

http://youtu.be/2iW0oEScMsw

Video 1531

http://youtu.be/VuzjXkRx4UI

Video 1532

http://youtu.be/2iW0oEScMsw

G015(AE)Lesson 5-Current time grading.zip

Video 1533

http://youtu.be/r0qkLrmkKsM

G015AE Lesson 6

Video 1534

http://youtu.be/InsTLh7_N5k

G015(AE)Lesson_7-CT_PT.zip

Video 1535

http://youtu.be/ZF_y65xsM_M

G015(AE)Lesson 8-Distance relay.zip

Video 1536

http://youtu.be/NKzMVquFLu8

http://www.filefactory.com/file/c386a2e/n/G015_AE_Lesson_8-Distance_relay.zip

G015(AE)Lesson 9-Telecom in power protection.zip

Video 1537

http://youtu.be/9C6ogqZAKRg

Video 1538

http://youtu.be/XRpffA6hU_U

Video 1539

http://youtu.be/X-kz3cyL9fU

G015(AG)Lesson 1-Stability.zip

Video 1540

http://youtu.be/fUyNqcXtBXg

G015(AG)Lesson 2-Generator load sharing.zip

Video 1541

http://youtu.be/A-t7XH4rK4M

Video 1542

http://youtu.be/OTsis_KIRuk

Video 1543

http://youtu.be/8j1nD9nY2hU

G015(AG)Lesson 3-Power Flow.zip

Video 1544

http://youtu.be/0OzT4Pol-Jc

Video 1545

http://youtu.be/fK0wcaTY_rw

G015(AG)Lesson 4-IP based system.zip

Video 1546

http://youtu.be/ve5O8K9fL7k

G015(AG)Lesson 5-Surge in power system.zip

Video 1547

http://youtu.be/6WkezTcOzX4

G015(AG)Lesson 6-CTPT Harmonic filter.zip

Video 1548

http://youtu.be/Uy7q9SsaOYs

G015(AG)Lesson 7-Short circuit in alternator.zip

Video 1549

http://youtu.be/b-46Kvn8kJI

G015(AG)Lesson 8-Corona.zip

Video 1550

http://youtu.be/XYGRAWOqzsc

G015(AG)Lesson 9-Power surge.zip

Video 1551

http://youtu.be/uzFS-otIn-g

Video 1552

http://youtu.be/IsZ_ccy630w

G015(AG)Lesson_10-Static_Var_Compensation.zip

Video 1553

http://youtu.be/y-of5oLojCU

G015(AG)Lesson 11-PF Control+Fuel cell.zip

Video 1554

http://youtu.be/AXbCcoQeLns

G015(AG)Lesson_12-Exercises.zip

Video 1555

http://youtu.be/nRGScOH9aSM

The links contain the following lessons

G015(AA)Lesson 1-Distribution system

G015(AA)Lesson 2-Demand factor

G015(AA)Lesson 3-Sag

G015(AA)Lesson 4-OH Line mechanical design

G015(AA)Lesson 5-UG Cable

G015(AA)Lesson 6-Voltage control

G015(AE)Lesson 1-Power system protection scheme

G015(AE)Lesson 2-Differential relay

G015(AE)Lesson 3-Over current & earth fault protection

G015(AE)Lesson 4-Three phase differential relay

G015(AE)Lesson 5-Current time grading

G015(AE)Lesson 6-Instrumentation transformer

G015(AE)Lesson 7-CT PT

G015(AE)Lesson 8-Distance relay

G015(AE)Lesson 9-Telecom in power protection

G015(AG)Lesson 1-Stability

G015(AG)Lesson 2-Generator load sharing

G015(AG)Lesson 3-Power Flow

G015(AG)Lesson 4-IP based system

G015(AG)Lesson 5-Surge in power system

G015(AG)Lesson 6-CTPT Harmonic filter

G015(AG)Lesson 7-Short circuit in alternator

G015(AG)Lesson 8-Corona

G015(AG)Lesson 9-Power surge

G015(AG)Lesson 10-Static Var Compensation

G015(AG)Lesson 11-PF Control+Fuel cell

Electrical Power Systems II

IS68+69

Electrical Energy Supply System

G037+G038+G039 Part 1/2/3+IS69

Page 232 to 270